.jpg)
Paint protection films are becoming quite popular among car lovers when it comes to shielding the vehicle's showroom shine. It protects your vehicle from rock chips, gravel, acid rain, tree sap, UV rays, oxidization, and discoloration.
After years of usage, the PPF might get damaged, and you will need to replace it. In this guide, we'll walk you through some simple steps on How to remove PPF. This guide is simple to follow and can be performed by anyone.
Tools Required to Remove Paint Protection Film
Before we answer your question, "How to remove paint protection film," it is essential to have a proper knowledge of what tools are required in PPF removal. Below mentioned are some tools needed for the process:
-
Heat Gun or blow dryer
-
Microfiber Clothes
-
Adhesive Remover
-
Plastic scraper
How to Remove Paint Protection Film From Cars?
In this section, we will guide you on “how to remove paint protection film from car” with the right technique. By following the mentioned steps, the PPF removal will become easy:
Step 1. Prepare the Surface
Before starting the process, make sure your vehicle is dry and clean. Get rid of all the dust, debris, and other environmental contaminants from the surface. After cleaning, you can start removing the film.
Step 2. Apply Heat Using a Heat Gun
Start by applying the heat on the smaller portion and gradually warm up the entire panel edge-to-edge with the help of a heat gun or blow dryer. Heat will help the film to loosen up the adhesive beneath the PPF. The removal process will become easy. After 5-10 minutes, your vehicle will be ready to peel off the film.
Step 3. Start Peeling
Begin peeling off the film from a corner, keeping your grip closer to the surface. It would be best if you used slow and deliberate movements to avoid damaging the paint or tearing the film. If the film is not coming out quickly, reapply heat to soften the adhesive. Remember to be patient enough in this process, as this may damage the paint beneath.
Step 4. Remove The Glue Remains
In some cases, residual adhesive can be found on the painting surface after the PPF has been removed. Using a specialized adhesive remover or a mixture of warm water and mild cleaner, you can get rid of this remaining glue. Use a microfiber towel to gently rub the adhesive remover into the affected areas until it is dissolved.
Step 5. Clean The Vehicle
Once the PPF is successfully removed and there is no glue stain on the vehicle's surface, clean the car. We advise you to avoid automatic car washes after the PPF removal as it might cause minor scratches or swirl marks.
When to Replace PPF?
If your PPF-protected films show the mentioned below signs, it's time to update your current protective film:
1. Extreme Yellowing:
If your PPF is showing a yellowish tint or it is getting discolored, this indicates that the film's effectiveness is diminishing.
2. Cracking:
If your film is tearing off or cracking from the surface, it's time to get it replaced.
3. Lifting at the Edges:
If the edges of the films are peeling off, there is a PPF application error; in this case, you can also consider replacing PPF.
4. Installation Error:
If you notice misalignments, stretch or blade marks, or dust and debris trapped under the film, you can ask the installer to replace the panel under the warranty without paying the PPF removal cost.
Does PPF Removal Damage the Paint?
Removing old PPF from your car is safe mainly and shouldn't harm the paint, much like peeling off a gentle sticker from glass. It's designed to come off cleanly when you're ready for a change, protecting the paint beneath it all the while. But the trick is in how you remove it. If you use our guide on "how to remove clear bra from car." You will never encounter this problem.
Conclusion
Almost every PPF gets spoiled after 5 to 10 years of usage. The film will start peeling off, or it will become yellowish. It is nearly impossible to address this problem, the only solution is to remove and replace the PPF.
After reading our blog, you must be confident of doing this task at home. However, we recommend you leave this work to the experts if you want to eliminate the risk of paint damage. PPF is the core part of the car detailing industry If you wish to remove PPF via a professional Auto detailer So, The Detailing Mafia is the number one auto detailing brand in pan India. You can easily connect with our team.
Frequently Asked Questions (F.A.Qs)
Can PPF coating be removed?
Yes, PPF films are easy to remove when they get damaged. Also, the removal process will not cause any damage to the painted surface. It is recommended, not to remove PPF by yourself, it should be removed only with the expert’s supervision.
Can you remove PPF yourself?
Yes, you can remove the PPF by yourself, but if you are careful enough, the original paintwork might come off with the Paint protection film. Removing old PPF is expert work, we recommend you to visit an expert.
What chemical removes PPF?
There’s no need for a chemical to remove the PPF. With the help of a heat gun, concentrate the heat on one section at a time. This will loosen the PPF and the film will easily come out on gentle pulling. Do not apply heat on a specific area for too long.
Does PPF damage car paint?
No, not at all! In fact, if you remove PPF after years of usage, the showroom shine of your vehicle will be intact.
How do you remove the ceramic coating from PPF?
To remove the ceramic coating from PPF, apply a chemical coating remover designed for this purpose. Ensure it's safe for use on PPF, follow the manufacturer's instructions carefully, and use a soft cloth or sponge to gently wipe away the coating.
To get one done on your car or enquire more:
Visit: https://www.thedetailingmafia.com/
Call: +91-80-100-44000 OR +91-92-894-44440
